EGC - RotaBolt How it works
Jump to...

 

A gauge pin of the same basic material as the parent fastener is positively anchored in a short central drilling. The Rota-load indicator, which is free to rotate on the pin, is set at a prescribed air-gap to the head of the machined fastener. The dimension of this air-gap is set according to the percentage yield stress selected.

The assembly is protected from contamination by a control cap which clips securely on the Rota-load indicator. It is this knurled cap which may be rotated by finger-tip when the fastener is not fully stressed. Within the cap, the integrity of key components is maintained by a specially compounded grease.

When the fastener is loaded, the air-gap closes down as a result of the small stretch that occurs. At the point where the Rota-load indicator may no longer be rotated by finger-tip, the correct load setting has been achieved.

Picture

EGC Home - RotaBolt - Technical Information - How it Works - Accuracy - Safety
Checkability - Lower Costs - Case Histories - Ordering Information


For sales information, email us at egc@egc-ent.com,
call us at 1-800-EGC-0211 (U.S.A. only) or 440-285-5835, or fax us at 440-285-8337.
©1999-2002 EGC Enterprises Inc.
140 Parker Court, Chardon, OH 44024
 
 
 

grafoil, flexible graphite, braided packing, compression pump shaft packing, valve stem packing, valve stem, non-asbestos gasketing, pump shaft seals, calgraph, texfoil, garfoil, high temp gaskets, high temp packing, steam packing, cryogenic seals, hydraulic seals, pump, o-rings, seats, ribbon pack, gore-tex, gaskets, gasketing, egc enterprises, industrial seal, flange gaskets, ring gaskets, die formed rings, die form packing, v-packing, handhole gaskets, manhole gaskets, high temp ball valve seat, high temp seat, grafoil tape, conductive gasket, thermal transfer, vacuum seal, vacuum gasket, exhaust seal, exhaust gasket, engine seal, engine gasket, aircraft o-ring, oring, exhaust seal, exhaust gasket, heat sink gasket, heat sinc gasket, heat sink, heat sinc, heater, thin film heater, flexible heater, emi shield, rf shield, emi/rf shield, thermal interface, die cut ring, die cut gasket, high temperature seal, high temperature gasket, composite material, flange, metal gasket, seal ring, bonnet seal, thermal, turbo, nuclear, clad o-ring, knitted wire mesh, wire ring, filter ring, knitted metal seal, knitted metal filter, grafoil, flexible graphite